Help Video

Stripping the fiber coating

Inserting the fibers into the splicer

Fiber type and protection sleeve settings

Splice protection

Connecting the AC adapter

Installing the battery pack

Charging the battery pack

Checking the battery level

Performing an Arc Test

Adjusting monitor angle

Disengaging the fiber clamps from the hood

Changing to the fiber holder system from fiber coating clamp

Using the tray on the case

Replacing the electrodes

Performing self inspection

Wireless LAN setup

Lynx-CustomFit™ Splice-On connector (SC, Fiber type)

Lynx-CustomFit™ Splice-On connector (SC, Cord type)

Lynx-CustomFit™ Splice-On connector (LC, Fiber type)

Lynx-CustomFit™ Splice-On connector (LC, Cord type)

NanoTune™

Preventive Maintenance

Cleaning the bare fiber

Cleaving the fiber with an FC-8R-MC

Cleaning the V-grooves

Cleaning the LEDs

Cleaning the bare fiber pads

Cleaning the microscope lens protection glass

Cleaning the heat shrink oven

Stripping the fibre coating

Inserting the fibres into the splicer

Fibre type and protection sleeve settings

Splice protection

Connecting the AC adapter

Installing the battery pack

Performing an Arc Test

Adjusting monitor angle

Disengaging the fibre clamps from the hood

Using the tray on the case

Replacing the electrodes

Performing Self Inspection

Cleaning the bare fibre

Cleaving the fibre with an FC-8R-MC

Checking the battery level

Changing to the fibre holder system from fibre coating clamp

Cleaning V-grooves

Cleaning LEDs

Cleaning bare fibre pads

Cleaning microscope lens protection glass

Cleaning the heat shrink oven

Wireless LAN setup

NanoTune™

Preventive maintenance

Core loss estimation technology

Using the working tray and the carrying case

Working tray -removing and fixing the splicer-

Working tray -charging the battery pack-

Stripping the fiber coating

Cleaning the bare fiber

Cleaving the fiber with an FC-8R-MC

Inserting the fibers into the splicer

Fibre type and protection sleeve settings

Performing an Arc Test

Splice protection

Connecting the AC adapter

Installing and removing the battery pack (BU-17)

Charging the battery pack

Cleaning the V-grooves

Cleaning the LEDs

Cleaning the bare fiber pads

Cleaning the microscope lens

Cleaning the heat shrink oven

Replacing the electrodes

Performing Self Inspection

Wireless LAN setup

Lock Function

Pass/Fail Function

Changing to the fiber holder system from fiber coating clamp

Using the multi clamp

Using the tripod

Lynx-CustomFit™ Splice-On Connector(SC, Fibre type)

Lynx-CustomFit™ Splice-On Connector(SC, Cord type)

Lynx-CustomFit™ Splice-On Connector(LC, Fibre type)

Lynx-CustomFit™ Splice-On Connector(LC, Cord type)

E-SC Fusion™ Connector

Working tray preparation

Basic operation

Maintenance

Preparation for fibre ribbon

200 to 250µm pitch conversion

Cleaving the fibre with FC-8R

Cleaving the fibre with FC-6RM

Inserting the fibres into the splicer

Fibre type and protection sleeve settings

Splicing and protection

Connecting the AC adapter

Installing the battery pack

Charging the battery pack

Checking the battery level

Performing an Arc Test

Adjusting monitor angle

Disengaging the fibre clamps from the hood

Advanced ACAS (Auto Clamping Adjustment System)

Using the tray on the case

Replacing the electrodes

Performing Self Inspection

Drop cable splicing

Lynx connector assembly

Splice-On connector(SC, fibre type)

Splice-On connector(SC, Cord type)

Splice-On connector(MPO, Bare ribbon fibre type)

Splice-On connector(MPO, 3mm round cord type)

250µm single fibre arrangement with OFA-01 & FHM-12V

200µm single fibre arrangement with OFA-01 & PCH-12A

Cleaning the bare fibre

Cleaning the V-grooves

Cleaning the LEDs

Cleaning the bare fibre pads

Cleaning the microscope lens protection glass

Cleaning the heat shrink oven

Wireless LAN setup

Basic splicing operation

Watching help vidos

Charging the battery pack

How to turn on a splicer

Fiber type and protection sleeve settings

Preparation for fiber ribbon

200 to 250um pitch conversion

Cleaving the fiber with FC-8R

Cleaving the fiber with FC-6R+

Inserting the fibers into the splicer

Performing an Arc Test

Splicing and protection

Enhanced ACAS (Auto Clamping Adjustment System)

Performing Self Inspection

Packing and storing with FC-6R+

Packing and storing with FC-8R

Using the tray on the case

Checking the battery level

Back monitor type

Software update on a computer

Software update on SumiCloud

Preventive maintenance

Drop cable splicing

Lynx connector assembly

Splice-On connector(SC, Fiber type)

Splice-On connector(SC, Cord type)

Splice-On connector(MPO, Bare ribbon fiber type)

Splice-On connector(MPO, 3mm round cord type)

Changing the V-groove

Wireless LAN setup for Android

Wireless LAN setup for IOS

Cleaning

Cleaning the bare fiber

Cleaning the V-grooves

Cleaning the LEDs

Cleaning the bare fiber pads

Cleaning the heat shrink oven

Cleaning the microscope lens protection glass

Replacing the electrodes

Replacing V-groove

Stripping the fibre coating

Cleaving the fibre (with FC-7R)

Inserting the fibre into the splicer

Fibre type and protection sleeve settings

Protecting the fibre

Drop cable splicing

Connecting the AC adapter

Installing the battery pack

Charging the battery pack in the splicer

Charging the battery pack with BC-12(option)

Performing an Arc Test

Using the tray on the case

Using the working table (Part no.WT-201,optional item)

Cleaning heat shrink oven

Replacing electrodes

Performing self inspection

Cleaning the bare fibre

Cleaning V-grooves

Cleaning LEDs

Cleaning bare fibre pads

Cleaning microscope lens