Help Video

Choose your device and watch the help video relevant to your device.

TYPE-82C
  • Stripping the fiber coating

  • Cleanin the bare fiber

  • Cleaving the fiber with an FC-8R-MC

  • Inserting the fibers into the splicer

  • Fiber type and protection sleeve settings

  • Splice protection

  • Connecting the AC adapter

  • Installing the battery pack

  • Charging the battery pack

  • Checking the battery level

  • Performing an Arc Test

  • Adjusting monitor angle

  • Disengaging the fiber clamps from the hood

  • Changing to the fiber holder system from fiber coating clamp

  • Using the tray on the case

  • Cleaning V-grooves

  • Cleaning LEDs

  • Cleaning bare fiber pads

  • Cleaning microscope lens protection glass

  • Cleaning the heat shrink oven

  • Replacing the electrodes

  • Performing Self Inspection

  • Wireless LAN setup

TYPE-72M12
  • Preparation for fiber ribbon

  • 200 to 250um pitch conversion

  • Cleaning the bare fiber

  • Cleaving the fiber with FC-8R

  • Cleaving the fiber with FC-6RM

  • Inserting the fibers into the splicer

  • Fiber type and protection sleeve settings

  • Splicing and protection

  • Connecting the AC adapter

  • Installing the battery pack

  • Charging the battery pack

  • Checking the battery level

  • Performing an Arc Test

  • Adjusting monitor angle

  • Disengaging the fiber clamps from the hood

  • Advanced ACAS (Auto Clamping Adjustment System)

  • Using the tray on the case

  • Cleaning the V-grooves

  • Cleaning the LEDs

  • Cleaning the bare fiber pads

  • Cleaning the microscope lens protection glass

  • Cleaning the heat shrink oven

  • Replacing the electrodes

  • Performing Self Inspection

  • Wireless LAN setup

  • Drop cable splicing

  • Lynx connector assembly

  • Splice-On connector(SC, Fiber type)

  • Splice-On connector(SC, Cord type)

  • Splice-On connector(MPO, Bare ribbon fiber type)

  • Splice-On connector(MPO, 3mm round cord type)

T-201eM4
  • Stripping the Fiber Coating

  • Stripping the Fiber Coating

  • Cleaning the Bare Fiber

  • Cleaving the Fiber (with FC-7R)

  • Inserting the Fiber into the Splicer

  • Fiber type and Protection Sleeve Settings

  • Protecting the Fiber

  • Drop cable splicing

  • Connecting the AC Adapter

  • Installing the Battery Pack

  • Charging the Battery Pack in the splicer

  • Charging the Battery Pack with BC-12(option)

  • Performing an Arc test

  • Using the Tray on the Case

  • Using the working table(Part no.WT-201,optional item)

  • Cleaning V-grooves

  • Cleaning LEDs

  • Cleaning Bare Fiber Pads

  • Cleaning Microscope Lens

  • Cleaning Heat Shrink Oven

  • Replacing Electrodes

  • Performing Self Inspection

T-201eVS
  • Stripping the Fiber Coating

  • Cleaning the Bare Fiber

  • Cleaving the Fiber (with FC-7R)

  • Inserting the Fiber into the Splicer

  • Fiber type and Protection Sleeve Settings

  • Protecting the Fiber

  • Drop cable splicing

  • Connecting the AC Adapter

  • Installing the Battery Pack

  • Charging the Battery Pack in the splicer

  • Charging the Battery Pack with BC-12(option)

  • Performing an Arc test

  • Using the Tray on the Case

  • Using the working table(Part no.WT-201,optional item)

  • Cleaning V-grooves

  • Cleaning LEDs

  • Cleaning Bare Fiber Pads

  • Cleaning Microscope Lens

  • Cleaning Heat Shrink Oven

  • Replacing Electrodes

  • Performing Self Inspection