Consumption items and others
Fiber Protection Sleeves
FPS series
The Fiber Protection Sleeves, FPS series are designed to reinforce optical fiber splices.
Sumitomo Electrics FPS series have earned a high reputation for their reliability and are used widely throughout the world.
| Specifications | |||
|---|---|---|---|
| Material | Outer tube | Flexible Polyolefin | |
| Inner tube | EVA : Ethylene-Vinyl Acetate | ||
| Strength member | Others | Stainless steel | |
| FPS-5 / FPS-6 | Glass-ceramic | ||
| Operating condition (after shrink) | Temperature : -30 to +70 degree C, Humidity : 0 to 95%RH (Non-condensing) | ||
| Dimensions | Quantity | Applicable Fibers | |||||
|---|---|---|---|---|---|---|---|
| Part No. | Sleeve length | Strength member length | Diameter after shrink | pcs/package | Fiber count | Coating diameter | Recommended cleave length |
| FPS-1 | 60.5mm | 59.5mm | Approx. 3.2mm | 50 | Single | 0.25 to 0.9mm | 16mm |
| FPS-40 | 40.5mm | 39.5mm | Approx. 3.2mm | 50 | Single | 0.25 to 0.9mm | 10mm |
| FPS-S-40 | 40mm | 38mm | Approx. 2.3mm | 50 | Single | 0.25 to 0.6mm | 10mm |
| FPS-S-32 | 32mm | 28mm | Approx. 2.3mm | 50 | Single | 0.25 to 0.6mm | 6mm |
| FPS-61-2.1 | 61.5mm | 57mm | Approx. 2.1mm | 100 | Single | 0.25mm | 16mm |
| FPS-61-2.6 | 61.5mm | 57mm | Approx. 2.6mm | 100 | Single | 0.25 to 0.9mm | 16mm |
| FPS-40-2.1 | 40.5mm | 36mm | Approx. 2.1mm | 100 | Single | 0.25mm | 10mm |
| FPS-40-2.6 | 40.5mm | 36mm | Approx. 2.6mm | 100 | Single | 0.25 to 0.9mm | 10mm |
| FPS-5 | 40.5mm | 40mm | Approx. 4.0mm x 3.8mm |
25 | Single to 8 | 0.3mm (thickness) |
10mm |
| FPS-6 | 40.5mm | 40mm | Approx. 4.5mm x 4.1mm |
25 | Single to 12 | 0.3mm (thickness) |
10mm |
| FPS-N4-12 | 13mm | 12mm | Approx. 1.5mm | 50 | Single | Up to 0.4mm | 3mm |
| FPS-N4-20 | 21mm | 20mm | Approx. 1.5mm | 50 | Single | Up to 0.4mm | 7mm |
| FPS-N4-25 | 26mm | 25mm | Approx. 1.5mm | 50 | Single | Up to 0.4mm | 9mm |
| FPS-N4-40 | 41mm | 40mm | Approx. 1.5mm | 50 | Single | Up to 0.4mm | 16mm |
| FPS-N9-15 | 15mm | 15mm | Approx. 2.3mm | 50 | Single | Up to 0.9mm | 4mm |
| FPS-N9-20 | 20mm | 20mm | Approx. 2.3mm | 50 | Single | Up to 0.9mm | 6mm |
| FPS-N9-25 | 25mm | 25mm | Approx. 2.3mm | 50 | Single | Up to 0.9mm | 6mm |
| FPS-D60 | 60.5mm | 59.5mm | Approx. 4.5mm x 4.7mm |
25 | Single | Drop / Indoor cable 2.0 x 3.1 or 2.6mm 1.6 x 2.0mm | 10mm |
* Specifications are subject to change without prior notice
Electrode for Fusion Splicer
ER series
The ER series of electrodes are specifically designed for Sumitomo Electrics fusion splicers. The electrodes have an important role in making a consistent and reliable splice. The ER series are supplied with a pair.
| Model | |
|---|---|
| Part No. | Applicable fusion splicer |
| ER-7 * | TYPE-39HS/SC, TYPE-45, TYPE-65 series |
| ER-8 * | TYPE-37 series |
| ER-9 * | TYPE-25 series |
| ER-10 * | TYPE-72 series, TYPE-82 series, TYPE-Q102 series TYPE-71 series, TYPE-81 series, TYPE-Q101 series, T-55, Z1C, T-600C, T-400S TYPE-39/FH/FA, TYPE-66, TYPE-46, TYPE-25e series |
| ER-11 * | TYPE-100S/Se, TYPE-201/201e series, TYPE-QH201e series |
* It is no longer available after the limited stock are sold.
| Specifications | |||||
|---|---|---|---|---|---|
| Part No. | ER-7 | ER-8 | ER-9 | ER-10 | ER-11 |
| Diameter D | 2mm | 1mm | 2mm | 2mm | 2mm |
| Length L | 16mm | 16mm | 13mm | 20mm | 12mm |
| Material | Tungsten alloy | ||||
* Specifications are subject to change without prior notice
Alcohol Dispenser
HR-3
The HR-3 is a container for solvents such as ethyl alcohol for bare fiber cleaning.
- Locking pump will not leak when engaged
- High density polyethylene suitable for many solvents
- 100% Stainless steel pump will not corrode or contaminate liquid - Dispenses approximately 0.2cc of liquid with each pump
- Wide opening that is easy to fill
- Translucent - allows easy viewing of contents
| Specifications | |
|---|---|
| Bottle capacity | 180 cc |
| Bottle material | HDPE(High density polyethylene) |
| Pump material | Stainless steel |
| Lockable | Yes |
| Dimensions | Approx. 55 x 55 x 110(H) mm |
| Weight | Approx. 65 g |
* Specifications are subject to change without prior notice
Fiber Arrangement Tool
FTA-02 series
The FTA-02 organizes individual fibers into temporary ribbons for mass fusion splicing.
Ribbonizing can be completed in less than 3 minutes, including adhesive drying time.
| Specifications | |||
|---|---|---|---|
| Part number | FTA-02 | FTA-02-200 | |
| Applicable Fiber | Material | Silica glass | |
| Coating diameter | Φ 250 um | Φ 200 um | |
| Coating material | UV cured resin | ||
| Fiber count | Up to 12 fibers | ||
| Ribbonised section length | Approx. 100 mm | ||
| Dimensions | 291(W) mm x 64(D) mm x 58(H) mm | ||
| Weight | 750 g | ||
| Consumables kit required | FAC-24 ( Optional ) Adhesive, applicator pads and pad removal pick |
||
* Specifications are subject to change without prior notice
V-groove cleaning brush
VGT series
VGT series are the best tool with a bundle of thin wire for cleaning splicer’s v-groove.
| Specifications | ||
|---|---|---|
| Part number | VGT-1 | VGT-2 |
| Size (Diameter x Length) mm | φ8 x 150mm | Φ2 x 45mm |
| Brush material | Stainless steel wire | |
* Specifications are subject to change without prior notice
Wireless LAN SD card for SumiCloud™
WLSD-0308
Sumitomo Electrics Fusion splicers can connect to a smartphone via Wi-Fi using a dedicated wireless LAN SD card and be used the service of SumiCloud™; Splice Data Management, Report Builder, Help Video, etc.
| Item | Specifications |
|---|---|
| Part No. | WLSD-0308 |
| Applicable Fusion Splicer | TYPE-72C, TYPE-Q102-CA, TYPE-82C TYPE-71C+, TYPE-Q101-CA+ |
| Interface | SD/SDHC Memory Card standard compatible |
| Capacity | 8 GB |
| Speed | Class 10 |
| Wireless LAN Standard | IEEE802. 11b/g/n |
| Wireless LAN Supporting Regions | Approved for use in the following countries, as of Mar 2016: Albania*, Australia, Austria, Bahrain*, Belarus*, Belgium, Bosnia-Herzegovina, Bulgaria, Canada, Chile, Colombia*, Croatia, Cyprus, Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel*, Italy, Japan, Kazakhstan, Kenya, Korea, Kuwait*, Latvia, Lebanon*, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Malta, Mexico*, Moldova*, Montenegro, Morocco*, Netherlands, New Zealand, Nigeria*, Norway, Oman*, Peru, Philippines, Poland, Portugal, Qatar*, Romania, Russia, Saudi Arabia, Singapore, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Taiwan, Thailand, the United States, Turkey, Ukraine*, United Arab Emirates, United Kingdom, Vietnam (* is only supported by WLSD-0308) |
* Specifications are subject to change without prior notice
Soft Case
CCS-25
The CCS-25 is a portable case, which is most appropriate designed for Sumitomo Electrics Fusion Splicers and accessories.
| Specifications | ||
|---|---|---|
| Part number | CCS-25 | |
| Dimensions | Inside | 340(W)×180(D)×200(H) mm |
| Outside | 420(W)×200(D)×240(H) mm | |
| Weight | Approx. 930g | |
| Material | Polyester | |
| Standard Package |
|
|
| Space for | Splicer 1pc, Cleaver 1pc, Remover 1pc, AC adapter 1pc, AC power cord 1pc, etc... | |
* Specifications are subject to change without prior notice
